好的。
OK.

欢迎回来。
Welcome back.

让我们继续讨论一些警报，看看如何在 easy build 或 5000 中创建这些警报。
Let's go ahead and jump into some alarms and see how we can create those in easy build or 5000.

我们要做的第一件事就是来到这里，你看我有这个，我有事件显示警报显示警报栏。
The first thing we're going to do is come up here and you see I've got this I've got event display alarm display alarm bar.

这些是我们将用来创建事件的工具。
So those are kind of our tools that we're going to be using to create events.

现在，在左边，我们有这个警报事件日志，现在对我来说，日志听起来像是发生的事情的列表。
And right now over here on the left we've got this alarm event log now a log to me sounds like a list of things that's happened.

但当我们点击它时，我们发现事实并非如此。
But when we click on this we see it's really not.

这实际上是我们设置闹钟的地方。
This is actually where we set up our alarms.

让我们继续看看我们有不同类别的警报。
Let's go ahead and we're going to look at we've got different categories of alarms.

这有点酷，但我只想继续保持原样。
That's kind of cool but I'm just going to go ahead and leave that as is.

我想设置一个单独的简单警报。
And I want to set up one single solitary simple alarm.

因此，让我们单击“新建”，我们将查看一个有点的地址类型，因为在我的警报中我总是使用位。
So let's click on new and we're going to look at an address type which is a bit because on my alarms I always use bits.

我不会让 Chimay 尝试确定何时出现不良状况。
I don't let the Chimay try to determine when there's a bad condition.

我让这一切在座位上发生，因为这就是电脑的用途。
I let all that happen in the seat because that's what the PC is for.

但很高兴知道我的年龄可以做到这一点。
But it's nice to know the age in my can do it.

所以优先考虑这个。
So the priority of this.

让我们高度重视它。
Let's give it a high priority.

这是来自我们的 PLCC。
And this is coming out of our PLCC.

所以让我们继续改变这一点。
So let's go ahead and change that.

我们要进入设置。
We're going to go into settings.

标签库，让我们继续设置一个新的标签名称，我将称呼这个 EHLO 人员，因为这将是我们的低流量。
Tag library and let's go ahead and set up a new tag name and I'll just call this EHLO fellow because that'll be our low flow.

这将与 B-3 相关。
And that is going to be associated with B-3.

让我们跳回 C 程序看看它在哪里。
And let's jump back into our C program to see where that is.

因此，我们的低流量警报位看起来只是尝试将其扩大一点。
So our low flow alarm bit it looks like it's just try to grow this out a little bit.

好吧，我们已经将警报位设置为 B-3 表示九，但我们实际上想使用通知位。
Well we've got the alarm bit as B-3 for nine but we actually want to use the notification bit.

那么让我们进入警报状态，我只需要把它放大一点，这样我就能真正看到。
So let's go into alarms and I just need to make this a little bit bigger so I can actually see.

这是我们的低流量通知位，10 时为 B-3。
And here's our low flow notification bit that's going to be B-3 for 10.

所以我们的地址将是 0 0 4 1 0 代表 4 10。
So our address is going to be 0 0 4 1 0 for 4 10.

现在我们已经有了一个新标签，我们可以点击“确定”，然后我们将一次又一次点击“确定”来使用它。
We can hit OK now we've got a new tag and then we'll hit OK again and again to use it.

让我们继续为此警报设置一条消息，该消息将是 yo flow is low 感叹号。
Let's go ahead and set up a message for this alarm and that message is going to be yo flow is low exclamation.

好的。
All right.

这是非常明显的。
That's pretty unmistakable.

让我们继续将其设置为红色，以使其更加可怕。
And let's go ahead and put that in a red color just to make it even scarier.

我不会使用声音或类似的东西，因为那有点俗气。
And I'm not going to use sounds or anything like that because that's kind of cheesy.

让我们继续点击“确定”并点击“退出”。
Let's go ahead and hit OK and hit exit.

如果我没记错的话，我刚刚设置了第一个闹钟。
So if I'm not mistaken I've just set up my first alarm.

现在最重要的是我需要一种方法来查看我的闹钟。
Now on top of that I need a way to see my alarm.

因此，我将单击一个警报栏，然后按其出现的方式进行操作。
So I'm going to click on a alarm bar and I'm going to take that exactly the way it comes.

让我们继续并点击“确定”。
And let's just go ahead and hit OK.

我将把它放在顶部附近，然后为了演示，我还将展示这个警报显示。
And I'm going to put that right here up near the top and then just for demonstration I'm also going to show this alarm display.

因此，让我们继续，单击“确定”，然后将其从盒子中取出，我也将其放在这里，以便我们可以看到这两个东西是什么样子。
So let's go ahead and just hit OK and take that right out of the box and I'm going to put that down here too so that we can see what both of those things look like.

然后我们继续进行在线模拟。
And then let's just go ahead and go with an online simulation.

我们现在已启动并运行，但我们没有低流量警报，因此我们需要创建一个。
We are now up and running but we don't have a low flow alarm so we're going to need to create one.

现在我们的系统正在运行，让我们进入 PLCC，我创建了一个实际上会生成低流量警报的位。
So now that our system is running let's go into our PLCC and I created a bit that would actually generate a low flow alarm.

因此，我将在这里进行模拟滚动，这是我引起低流量警报的部分。
So I'm going to come into simulation scroll down here a little bit and here's my bit to cause a low flow alarm.

我只是要切换它，让我们看看什么时候会发生这种情况，我有一个待处理的流量警报。
I'm just going to toggle that and let's see when this thing happens I've got a flow alarm pending.

但我的坦克似乎没有运转。
But it looks like my tank isn't running.

那么，让我们继续把我的坦克扔到这里吧。
So let's go ahead and drop my tank down here.

这应该让它再次启动。
That should get it to start up again.

一旦这个数字开始上升，就意味着她的泵正在运行，但几秒钟后流量开关没有关闭。
And once this numbers started going up that means her pump is running and when after a couple of seconds that flow switch doesn't close.

我们到了那里，我们的警报就到了。
We there we go there's our alarm.

就像这样，我们有两个不同的显示屏告诉我们流量很低。
And just like that we've got two different displays that tell us that our flow is low.

因此，我们确实需要将其中之一或两者都放在我们创建的每个屏幕上，以确保操作员在他所在的任何屏幕上都能收到通知。
So we really would need to put one of these or both of these on every single screen we create to make sure that the operator is notified on whatever screen he's on.

如果这对我们很重要，如果我们使用真正的非关键警报，那么也许这没什么大不了的。
If that's important to us if we're using really non-critical alarms then maybe it's not a big deal.

因此，也许我们想创建自己的通知系统来告诉用户他收到了警报，但这就是内置功能的工作原理。
So maybe we want to create our own notification system for telling the user that he's got an alarm but this is how the built in stuff works.

它给了我们一条消息，给了我们时间，你知道你甚至可以添加它并在其中添加一些交互性，例如致谢。
It gives us a message it gives us the time and you know you can even add to it and put some interactivity in there like acknowledgements.

我的意思是，继续离开这里，我将重置此警报。
I mean go ahead and exit out of here and I'm going to reset this alarm.

因此，让我们回到“查看”选项卡并右键单击“警报重置”。
So let's go back into our review tab and right click on our alarm reset.

我们只需切换它即可消除警报。
Let's just toggle that to get rid of the alarm.

那么接下来只是为了展示这些事情是如何清晰的。
So then just to show how these things clear.

我将继续在此处创建另一个按钮。
I'm going to go ahead and create one more button right here.

而这个家伙，将会被贴上重置的标签。
And this guy is going to have the label of reset.

我将使它成为一个简单的警报重置。
I'm going to just make that a simple alarm reset.

那么让我们进入新的设置标签库。
So let's go into settings tag library new.

这将是他的 RISC TI 的标签名称。
And that's going to be ail him RISC TI for a tag name.

我将对其进行一些设置，然后返回此处，看看我的警报重置位是什么。
I'm going to set that up too a bit and go back in here and see what my alarm reset bit is.

3:09 那是一架 B-3。
That's a B-3 3:09.

所以我的地址将是 0 0 0 3 0 9 0 好吧好吧好吧。
So my address is going to be 0 0 0 3 0 9 0 ok ok ok again.

然后我会点击“确定”。
And then I'll hit OK.

所以现在我已经重置了闹钟。
So now I've got an alarm reset.

让我们继续回到在线模拟工具。
Let's go ahead and go back to tools an online simulation.

现在我们没有警报，但没关系，我们会解决这个问题。
And right now we have no alarms but that's OK we're going to fix that.

让我们回到 Sam 并多次切换该位以使我们自己有一个待处理的警报。
Let's go back into Sam and toggle that bit a couple more times to get ourselves an alarm pending.

当我们回到这里时，我们的泵似乎没有运行。
And when we come back in here it looks like our pump is not running.

因此，让我们继续前进，然后我们的警报就会响起。
So let's go ahead and get that going and boom there's our alarm.

当我重置它时，警报消失了。
And when I reset it there the alarm disappears.

因此，我们现在可以创建警报，我们可以从屏幕上管理它们，我们可以将它们显示给操作员。
So we can now create alarms we can manage them from the screen we can display them for the operator.

生活是美好的。
And life is good.

这就是本次讲座的内容。
So that's it for this lecture.

我会在接下来的欢呼声中见到你。
I will see you in the next cheers.